原理
雷达物位计天线发射较窄的微波脉冲，这个脉冲以光速在空间传播，遇到被测介质表面，其部分能量被反射回来，被同一天线接收。发射脉冲与接收脉冲的时间间隔与天线到被测介质表面的距离成正比，从而计算出天线到被测介质表面的距离。
特点
由于采用了先进的微处理器和独特的EchoDiscovery回波处理技术，雷达物位计可以应用于各种复杂工况。
“虚假回波学习”功能使得仪表在多个虚假回波的工况下，可正确地确认真实回波，获得准确的测量结果。
多种过程连接方式及天线型式，使得WTCRD5X系列雷达物位计适于各种复杂工况及应用场合。如：高温、高压及小介电常数介质的测量等。
采用脉冲工作方式，雷达物位计发射功率极低，可安装于各种金属、非金属容器内，对人体及环境均无伤害。

特  征： 喇叭口天线，波束角较小。
应  用： 液体测量或短量程固体测量。能适应过程条件复杂的环境。
最大量程： WTCRD53 [30m] / WTCRD54 [70m]
测量精度： WTCRD53为±10mm / WTCRD54为 ±20mm
过程连接： 法兰316L
天线材料： 不锈钢316L /PTFE
过程温度： -40…200°C
过程压力： -1.0…40bar
频率范围： 6GHz
信号输出： 两线制/四线制4…20mA/HART
许可证 ： P 标准型（非防爆） I 本安型（Exia IIC T6）（只可选用铝外壳）
C 本安型+船用许可证（Exia IIC T6）（只可选用不锈钢外壳）

G 本安型+隔爆型（Exd [ia]ia IIC T6）（选用外壳见下“注”）
天线型式/材料： C 喇叭天线50/不锈钢316L（仅限导波管安装） D 喇叭天线80/不锈钢316L（仅限导波管安装）*
E 喇叭天线100/不锈钢316L F 喇叭天线150/不锈钢316L
G 喇叭天线200/不锈钢316L
天线延长管： A 无 B   200mm C   500mm D   1000mm E   2000mm X 特殊定制
过程连接：
FA 法兰 DN50  PN1.6 不锈钢316L（GB/T9119-2000） FB 法兰 DN80  PN1.6 不锈钢316L（GB/T9119-2000）
FC 法兰 DN100 PN1.6 不锈钢316L（GB/T9119-2000） FD 法兰 DN150 PN1.6 不锈钢316L（GB/T9119-2000）
FE 法兰 DN200 PN1.6 不锈钢316L（GB/T9119-2000） YP 特殊制定
密封/过程温度：
2  Viton/-40～+130℃ 3  Kalrez/-20～+130℃
4  Viton/-40～+200℃带散热片（过程温度大于100℃时选用） 5  Kalrez/-20～+200℃带散热片（过程温度大于100℃时选用）
电子组件：
B   (4～20)mA/HART两线制 C   (4～20)mA/(22.8～26.4)V DC/HART两线/四线制 D   (198～242)V AC/HART四线制
外壳/防护等级：A 铝/IP67B 塑料/IP66D 铝两腔/IP67G 不锈钢316L/IP67
电缆进线： M   M20x1.5 N   ½NPT
现场显示/编程：
A 带 X 不带
吹扫：

A 带 X 不带
注: 本安+船用许可证（Exia IIC T6）只限用“A”或“B”电子组件及“G”型外壳；本安+隔爆型（Exd [ia]ia IIC T6）只限用“D”型外壳。

Principle: the radar level gauge antenna transmits a narrow microwave pulse, which propagates in space at the speed of light.

When it encounters the surface of the measured medium, some of its energy is reflected back and received by the same antenna.

The time interval between the transmitting pulse and the receiving pulse is proportional to the distance from the antenna to the

measured dielectric surface, thus the distance from the antenna to the measured dielectric surface is calculated.

Features: because of the advanced microprocessor and unique EchoDiscovery echo processing technology, radar level meter

can be used in all kinds of complex working conditions. The "false echo learning" function enables the instrument to

correctly confirm the true echo and obtain the accurate measurement results under the condition of multiple false echoes.

A variety of process connection modes and antenna types make WTCRD5X series radar level meters suitable for

various complex working conditions and applications. Such as: high temperature, high pressure and small dielectric constant measurement, etc.

The radar level meter can be installed in all kinds of metal and non-metal containers without harm to human body

and environment by means of pulse working mode, the radar level meter emits very low power and can be installed in various

metal and non-metallic containers. Characteristic: trumpet antenna, small beam angle. Should be used: liquid measurement or short-range solid measurement.

Able to adapt to complex process conditions. Maximum measuring range:

WTCRD53 [30m] / WTCRD54 [70m] measuring accuracy: WTCRD53 ±10mm / WTCRD54 ±20mm

process connection: flange 316L antenna material: stainless steel 316L / PTFE process temperature:-40. 200 °C

process pressure:-1.0. 40bar frequency range: 6GHz signal output: two-wire / four-wire 4. 20mA/HART

license: P Standard (non-explosion-proof) I intrinsically safe (Exia IIC T6) (aluminum case only)

C intrinsically safe marine license (Exia IIC T6) (stainless steel case only) G Intrinsically safe (Exd [ia] ia IIC T6)

antenna type / material: C horn antenna 50 / stainless steel 316L (limited waveguide installation) D horn

antenna 80 / stainless steel 316L (waveguide installation only) * E horn antenna 100 / stainless steel 316L F

horn antenna 150 / stainless steel 316L G horn antenna 200 / stainless steel 316L antenna extension

tube: a non-B 200mm C 500mm D 1000mm E 2000mm X Special custom process connection:

FA flange DN50 PN1.6 stainless steel 316L (GB/T9119-2000) FB flange DN80 PN1.6 stainless steel 316L

(GB/T9119-2000) FC flange DN100 PN1.6 stainless steel 316L (GB/T9119) -2000) FD flanges DN150 PN1.6 stainless steel 316L

(GB/T9119-2000) FE flanges DN200 PN1.6 stainless steel 316L (GB/T9119-2000) YP special seal / process

temperature: 2 Viton/-40~ 130 ℃ 3 Kalrez/-20~ 130 ℃ 4 Viton/-40~ 200 ℃ with heatsink (process temperature greater

than 100 ℃; 5 Kalrez/-20~ 200 ℃ with heat sink (process temperature greater than 100 ℃) electronic module: B (4? 20)

MA/HART two-wire C (4 / 20) mA/ (22.8-26.4) V DC/HART two-wire / four-wire D (198 / 242) V AC/HART

four-wire housing / protection class: a aluminum / IP67B plastic / IP66D aluminum two-wire case / protection class:

a aluminum / IP67B plastic / IP66D aluminum Cavity / IP67G stainless Steel 316L/IP67 Cable Inlet: M M20x1.5 N + NPT

onsite display / programming: a with X without sweep, A with X without Note: this safe Shipbuilding license

(Exia IIC T6 only) Use "A" or "B" electronic components and "G" enclosure; Exd [ia] ia IIC T6 is limited to "D" case.